Raf Carpentry
Learn

Learn · fixing to walls

How to hang something heavy on any wall

Find out what the wall is first. Brick and block take a wall plug and screw, a timber stud takes a screw straight in, and plasterboard on its own needs a metal cavity fixing. For anything heavy, like a wall cupboard, a TV or a big mirror, fix into the studs or the brickwork.

6 stepsAbout 30 minutesMoving drawingsStart
Step 1 of 6

Step 1 of 6

Knock and listen

Knock on the wall where it’s going. A hollow knock is plasterboard on a frame of timber studs. A dull, solid knock is brick or block. Knock along the wall too: the hollow sound goes dull where there’s a stud behind.

In older London houses a hollow wall can be lath and plaster: fix into the timber behind it, never the plaster.

Which fixing for which wall

The wall decides the fixing. Use the plug, bit and screw sizes on the pack together: they’re made as a set.

  • Brick or block (a solid knock)The fixing:Masonry bit, wall plug and screwHeavy things: wall cupboards, TVs, big mirrors
  • Timber stud behind plasterboardThe fixing:A wood screw straight into the studHeavy things, with a fixing in every stud it crosses
  • Plasterboard with no stud behindThe fixing:A metal cavity fixing, like a spring toggleLight things: pictures, small shelves. The pack says what it holds
  • Lath and plaster (older houses)The fixing:A screw into the timber behindFind the timber first: the plaster crumbles
  • Metal studs (the detector says metal)The fixing:Fixings made for metal studs, or spring togglesCheck the pack for metal studs

Something heavy where the studs aren’t where you need them? Fix a timber batten across two studs first, or hang it on a French cleat screwed into every stud it crosses.

What you need

Links marked Amazon are affiliate links: I earn a small commission if you buy through them, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Be careful

  • Never drill straight above, below or beside a socket or a switch, or within 150 mm of the ceiling or a corner: that’s where cables are allowed to run.
  • Anything heavy over a bed, a sofa or where children play: fix it into studs or brick, with more fixings than you think it needs.
  • Two people to lift and hold anything big while it’s fixed.

Questions

Can I hang a TV on plasterboard?

Not on the plasterboard alone. Fix the bracket into the studs behind it, or into a timber batten that is itself screwed across two studs. If the studs aren’t where the bracket needs them, that batten is the answer.

What size wall plug do I need?

The one the pack says goes with your screw and your drill bit. Plug, bit and screw are made as a set: the bit makes the hole, the plug fills it, and the screw spreads the plug so it grips the wall.

How do I know if there’s a cable behind the wall?

Cables are allowed to run straight up, down and sideways from a socket or switch, and within 150 mm of the ceiling and the corners. Keep out of those lines, and check with a cable detector before you drill. If a fixing has to go near one, move it.

How much weight can a wall plug hold?

It depends on the plug, the screw and the wall, and the pack gives a figure for each kind of wall. Into solid brick it holds far more than in plasterboard. For anything heavy use more than one fixing, and go into studs or brick.

Can you put it up for me?

Yes. I fit wall cupboards, shelves, panelling and fitted furniture across London. Press Get a quote, or send me a photo of the wall on WhatsApp.