Raf Carpentry
Tools

A fitter's guide · PDF

IKEA PAX, built in.

How to make flat-pack PAX wardrobes look made to measure: measure, pick the frames, make the parts round them and fit it all, floor to ceiling and wall to wall. The way I do it on my own jobs.

Card, Apple Pay or Google Pay through Stripe. Download straight after paying.

  • 22 pages, A4 PDF
  • Every size in mm
  • A cut list for a real wall
  • Photos from my jobs

By Raf Janczy, a London carpenter who fits IKEA PAX built in for a living.

What's inside

The whole job, in order.

  • What gives flat-pack away, and the five fixes
  • Will PAX work in your room? Five checks before you buy
  • Where to measure, and a sheet to write it down
  • Which frames fill your wall: the sums done for 14 walls
  • Which height for your ceiling, and what goes above it
  • The 75 cm frame and its doors
  • Every part you make, with the sum for each size
  • A full cut list for a real 2400 mm wall
  • A blank cut list to fill in for yours
  • Seven steps to fit it, with photos from my jobs
  • Scribing to a wall with a school compass
  • Ten mistakes to avoid, and a final checklist
The guide cover: PAX frames drawn with the fillers, top boxes and ceiling strip you make in MDFPage 4: a drawing of the example wall with every part markedPage 8: the two PAX heights and what goes above eachPage 17: scribing fillers with a school compass, and the end panels

Four of the 22 pages. Tap one to see it bigger.

It's for you if

  • You're buying PAX and want it to look fitted, not flat-pack
  • You're happy with a drill, a saw and a level
  • You want the sums done before you order a thing

Free first

Not sure PAX suits your room? Read PAX or made to measure, which height fits your ceiling and fitting PAX wall to wall. The free PAX planner does the sums for your wall.

Questions

What do I get?

A 22-page A4 PDF. Read it on your phone in the room, or print it. Every size is in millimetres, and every drawing is to scale.

How do I get it?

Pay by card, Apple Pay or Google Pay. The download opens straight after paying, and the link comes by email too, so you can get it again.

Do I need a workshop?

No. Every part you make is a straight cut in 18 mm MDF, and most board suppliers will cut your list for you. The guide shows how to scribe the last edges on site with a school compass.

Does it cover sliding doors?

It's written for hinged doors. With IKEA's sliding doors the frames, fillers and the top still go the same way, but the door steps don't apply.

Is it made by IKEA?

No. It's my own guide, from fitting PAX built in across London. IKEA's sizes in it are from IKEA's own pages, checked in November 2026.

Can I return it?

It's a download you get straight away, so once you've paid it can't be returned. If something in it is wrong or unclear, email me and I'll put it right.

Can you fit it for me?

In London, yes. Plan your project and send me your sizes, or your IKEA design code, and I come and measure up for free.

Make your PAX look built in.

22 pages, the sums done, £9.99.

Buy the guide, £9.99

IKEA and PAX are trademarks of Inter IKEA Systems B.V. This guide is not made by or connected with IKEA. Rafal Solutions Ltd · Company no. 13645392